parrot security os raspberry pi image builder

The power figures quoted are the bare minimum to run the SoC with no peripherals. Now you should be able to log in via telnet, ssh, or http to set your password. In order to set it up with a fixed IP different from the default 192.168.1.1 do the following: In order to set it up as a DHCP client, attach a serial console and do the following:

If it is not possible to resolve the IP conflict read further … Once you have access to the OpenWrt you can set password and enable DHCP. In that case if possible change the gateway IP to something else, then try accessing using the default static IP address of 192.168.1.1 using telnet(ssh) or http. It is highly likely that the gateway(router) to which the Raspberry PI is connected also has the same IP of 192.168.1.1 By default the DHCP client is disabled but the IP address is configured as static 192.168.1.1Īfter having flashed OpenWrt like described above, you can reach the OpenWrt via Ethernet by using the IP address 192.168.1.1 It might be bit tricky to connect via Ethernet for the first time. Country Code setting, WiFi 2.4GHz (work in snapshot), WIP

Parrot security os raspberry pi image builder